Hearth-and-home-technologies Heatilator GDST5244I User Manual Page 2
- Page / 60
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Heatilator • GDST5244I • 4045-127 • Rev W • 11/082
Listing Label Information/Location
Model Name: ___________________________________________ Date purchased/installed: __________________
Serial Number: __________________________________________ Location on fi replace: _____________________
Dealership purchased from: _______________________________ Dealer Phone: __________________________
Notes: _______________________________________________________________________________________
_____________________________________________________________________________________________
A. Congratulations
Congratulations on selecting a Heatilator gas fi replace, an
elegant and clean alternative to wood burning fi replaces.
The Heatilator gas fi replace you have selected is designed
to provide the utmost in safety, reliability, and effi ciency.
As the owner of a new fi replace, you’ll want to read and
carefully follow all of the instructions contained in this
owner’s manual. Pay special attention to all cautions and
warnings.
This owner’s manual should be retained for future reference.
We suggest that you keep it with your other important
documents and product manuals.
The information contained in this owner’s manual, unless
noted otherwise, applies to all models and gas control
systems.
Your new Heatilator gas fi replace will give you years of
durable use and trouble-free enjoyment. Welcome to the
Heatilator family of fi replace products!
We recommend that you record the following pertinent
information about your fi replace.
The model information regarding your specifi c fi replace can be found on
the rating plate usually located in the control area of the fi replace.
Homeowner Reference Information
Read this manual before installing or operating this appliance.
Please retain this owner’s manual for future reference.
XXXX
CERTIFIED
FOR CANADA
CERTIFIÉ POUR LE
CANADA
Hearth & Home Technologies Inc
1915 W. Saunders Street
Mt. Pleasant, IA 52641
SERIAL
NO. DE SÉRIE
ANSI Standard
MODEL MFG. DATE
MODÈLE DATE DE FAB.
GAS TYPE/TYPE DE GAZ NATURAL/NATUREL PROPANE
ALTITUDE 0-2000 2000-4000 FT/PI 0-2000 2000-4000 FT/PI
MAX INPUT/DÉBIT XX,XXX XX,XXX BTUH XX,XXX XX,XXX BTUH
MIN INPUT/DÉBIT XX,XXX XX,XXX BTUH XX,XXX XX,XXX BTUH
MANIFOLD PRESSURE/PRESSION TUBULAIRE
MAX. XX IN. W.C./C. D'EAU XX IN. W.C./C. D'EAU
MIN. XX IN. W.C./C. D'EAU XX IN. W.C./C. D'EAU
MIN. INLET PRESS. XX IN. W.C./C. D'EAU 1XX IN. W.C./C. D'EAU
FOR THE PURPOSE OF INPUT ADJUSTMENT
PRESS. MIN. D'ALIMENTATION
ORIFICE SIZE
DIAM. DE L'INJECTEUR XX/XX DIA. in./mm XX/XX DIA. in./mm
LESS THAN/MOINS DE 3 AMPÈRES., 115V., 60 Hz
DO NOT REMOVE OR COVER THIS LABEL.
VENTED GAS FIREPLACE - NOT FOR USE WITH SOLID FUEL.
FOYER À GAZ À ÉVACUATION - NE DOIT PAS ÊTRE UTILISÉ
AVEC UN COMBUSTIBLE SOLIDE.
XXXXXXXXX
XXXXXX
Serial #
Gas Type
Orifice
Size
Model #
- Owner’s Manual 1
- XXXXXXXXX 2
- Table of Contents 3
- User Guide 3
- 14 Appliance Setup 4
- 15 Troubleshooting 4
- 16 Reference Materials 4
- B. Warranty 5
- B. Warranty (continued) 6
- Listing and Code Approvals 7
- Massachusetts 8
- Figure 2.2 Clear Space 10
- LIGHTING INSTRUCTIONS 11
- TO TURN OFF GAS TO APPLIANCE 11
- NATURAL GAS 11
- J. After Fireplace is Lit 12
- K. Frequently Asked Questions 12
- Maintenance and Service 13
- Technician 14
- Installer Guide 15
- C. Tools and Supplies Needed 16
- Framing and Clearances 17
- Dimensions 19
- Termination Locations 20
- Service 21
- (see chart) 22
- E. Vent Diagrams 23
- 4 ft min 24
- (1.22 m) 24
- 25 ft max 24
- (7.62 m) 24
- Installed 25
- Vertically 25
- Note: If installing a verti 26
- 12 ft (3.66 m) min 27
- 60 ft (18.29 m) max 27
- Maximum horizontal run is 27
- 100% of vertical, but cannot 27
- B. Wall Penetration Framing 28
- 3 fasteners 29
- Appliance Preparation 31
- Install Vent Pipe 32
- C. Assemble Slip Sections 33
- E. Disassemble Vent Sections 34
- D. Secure the Vent Sections 34
- (SLP only) 35
- Flashing 36
- I. Install RF4-8 37
- Termination 38
- Gas Information 40
- Electrical Information 41
- E. Junction Box Installation 42
- B. Facing Material 43
- C. Clean the Appliance 44
- D. Accessories 44
- E. Install the Log Set 44
- Sets here 45
- Removing Fixed Glass Assembly 46
- Troubleshooting 47
- Reference Materials 49
- B. Vent Components Diagrams 50
- (660 mm) 51
- Effective Height/Length 55
- C. Service Parts 57
- C. Service Parts (continued) 58
- D. Optional Components 59
- DO NOT DISCARD THIS MANUAL 60
Related products and manuals for Kiln Hearth-and-home-technologies Heatilator GDST5244I
(2 pages)© 2020, manymanuals.com. All rights reserved. | 1.280 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals